Morf® original

Morf® original

Multi-purpose use. Breathable fabric. Machine washable/non iron. Seam free for comfort. Please note, the print area needs to be considered. Whilst you can print the whole piece of material, the way you wear the product means you may wish to mark your print area out only. Cover the whole product with Teflon whilst printing. Can be Transfer Printed, HTV Printed, Printable Media, sublimated (Whites). Whilst these products can be printed with a vast array of HTV and printable medias we recommend the following products. RF015 Universal HTV at 130 degrees for 5 seconds - MT107/117 123 HTC for 120 degrees for 8 seconds - RF025 Universal Printable Media at 130 degrees for 5 seconds - The Magic Touch wow transfer paper or Tone on light colours - Sublimation (cover the whole mask with sub paper and press around 190 for 1 minute.)(Light Colours Only). Higher temperatures may cause heat warping and marks where the transfer has been pressed. BSCI certified. Reach certified.
SKU: BC900
Picture of Morf® original
Details
Country of origin
CN
Packaging
192 / Carton

Product configuration

1
  • Airforce Blue
  • Arctic Camo
  • Black
  • Bottle Green
  • Bright Red
  • Bright Royal
  • Burgundy
  • Chocolate
  • Classic Pink
  • Classic Red
  • French Navy
  • Fluorescent Orange
  • Fluorescent Pink
  • Fuchsia
  • Fluorescent Yellow
  • Graphite Grey
  • Heather Grey
  • Jungle Camoflague
  • Kelly Green
  • Light Grey
  • lime Green
  • Mint
  • Midnight Camo
  • Olive Green
  • Orange
  • Purple
  • Sand
  • Sapphire Blue
  • Sky Blue
  • Surf Blue
  • White
  • Yellow
2
3

Direct-to-Film is a process where we print your design onto a film and apply this using heat seal technology, really good for single to full colour designs and can be applied to a wide variety of garments.

Direct-to-Garment. A high quality printer applies the design directly onto your garment, really useful for full colour branding and complicated designs, garments must be 100% cotton.

A process which is mostly used for smaller designs, applied via industrial machinery to decorate your garments using needle and thread, a classy way to finish your garment branding.

A technique where ink is applied to a surface by being pushed through a mesh screen, typically onto garments, a hard-wearing process that can be used on many garment types.

Your price

Quantity
x
Unit Price
£0.00
Gross Price
£0.00
Add VAT
Description

Multi-purpose use. Breathable fabric. Machine washable/non iron. Seam free for comfort. Please note, the print area needs to be considered. Whilst you can print the whole piece of material, the way you wear the product means you may wish to mark your print area out only. Cover the whole product with Teflon whilst printing. Can be Transfer Printed, HTV Printed, Printable Media, sublimated (Whites). Whilst these products can be printed with a vast array of HTV and printable medias we recommend the following products. RF015 Universal HTV at 130 degrees for 5 seconds - MT107/117 123 HTC for 120 degrees for 8 seconds - RF025 Universal Printable Media at 130 degrees for 5 seconds - The Magic Touch wow transfer paper or Tone on light colours - Sublimation (cover the whole mask with sub paper and press around 190 for 1 minute.)(Light Colours Only). Higher temperatures may cause heat warping and marks where the transfer has been pressed. BSCI certified. Reach certified.

  • Multi-purpose use
  • Seam-free for comfort
  • Breathable fabric
  • Machine wash warm. Do not iron. Do not dry clean
  • 100% Polyester microfibre